idw – Informationsdienst Wissenschaft
Nachrichten, Termine, Experten
Nachrichten, Termine, Experten
Premier at formnext: Additive Manufacturing of Copper Materials Using Selective Laser Melting with Green Light
An innovation in the field of additive manufacturing will make its debut from November 14–17 at this year’s formnext in Frankfurt, Germany: the Fraunhofer Institute for Laser Technology ILT in Aachen will be presenting a new approach for selective laser melting of copper materials. In the future, it should offer users the first cost-effective method for 3D printing components made of pure and highly conductive copper.
Selective Laser Melting (SLM), also known as Laser Beam Melting (LBM) or Laser-Powder Bed Fusion (L-PBF), has already proven itself as a powder-bed-based additive manufacturing process in several sectors, such as medical technology, turbo machinery manufacturing, aerospace and automotive engineering. At present, it is primarily used to process steels, titanium and aluminum alloys, as well as nickel and cobalt alloys. Fraunhofer ILT researchers in Aachen now want to further develop SLM as part of a research project funded by AiF German Federation of Industrial Research Associations. Their goal is to make it more suitable for the additive manufacturing of components made of copper alloys and pure copper; the latter is an attractive option for end users, as it is more electrically and thermally conductive than copper alloys. Therefore, a specially developed laser beam source that operates with green rather than infrared light will be designed at the Fraunhofer ILT by the end of 2017.
SLM Currently Suited only for Copper Alloys
“Depending on surface properties, pure copper reflects up to 90 percent of laser radiation in conventionally used wavelengths of 1µm,” explains Daniel Heussen, research fellow in the Rapid Manufacturing group.
As a result, only a small portion of the laser energy is deposited in the material and, thus, is available for the melting process. The reflected radiation can also damage the components of the system. In addition, the absorptivity of the material for the infrared light rises rapidly as the material transitions from a solid to liquid state, thus triggering an unstable and intermittent remelting process.
Using green laser light with a wavelength of 515 nm the absorptivity of pure copper is much higher. This means that less laser power output is needed for a stable process. Furthermore, the laser beam can be focused more precisely, allowing it to manufacture far more delicate components using the new SLM process. According to Heussen: “We are hoping for a more homogeneous melt pool dynamics so that we can build components with high material density and achieve other positive effects, such as a higher detail resolution.”
Taking Charge: Construction of a Green SLM Laser
With no such “green” laser source on the market meeting the boundary conditions of the SLM process, the department for laser beam source development at Fraunhofer ILT is building its own in a project they call “SLM in green.” Their aim is to create a high-quality laser for single-mode operation that functions with a maximum output of 400 watts in continuous service (cw) with green wavelength (515 nm). A “SLM in green” laboratory setup is expected to be ready by the end of 2017. Thereafter, the Fraunhofer ILT will further develop its processes as part of the research project funded by the AiF.
The primary future goal is to create a reliable process with which industrial users can 3D print complex geometries of pure copper with hollow structures and undercuts. The process can be used for highly efficient heat exchangers and heat sinks or for the production of delicate, complex electrical components in small batches. Heussen explains: “Inductors for inductive heat treatment in industrial production are excellent showcases for additive manufacturing. They are mostly produced in small numbers with a high level of complexity and a wide range of different variants.”
SLM in Green: 3D Printing of Metal Jewelry
In the field of jewelry design, “SLM in green” could offer a far more efficient and reproducible process for manufacturing complex structures than conventional techniques. Compared to other additive methods such as electron beam melting (EBM), the scientists are hoping for a notably higher detail resolution as well as greater cost efficiency in production. The green laser should be suitable not just for copper, but also non-ferrous and precious metals in the jewelry industry. “However, before we achieve that, we still need to overcome a few hurdles in process and system development and gain a deeper process understanding for the use of the new wavelength,” Heussen says. “This is currently the goal of the publicly funded project, which will run until mid-2019.”
Fraunhofer ILT will show a model and initial process videos to present its new research topic to interested parties at formnext: hall 3.0, stand F50.
Contact
M. Sc. Daniel Heußen
Rapid Manufacturing Group
Telephone +49 241 8906-8362
daniel.heussen@ilt.fraunhofer.de
Dr.-Ing. Wilhelm Meiners
Group Manager Rapid Manufacturing
Telephone +49 241 8906-301
wilhelm.meiners@ilt.fraunhofer.de
http://www.ilt.fraunhofer.de/en
Picture 1: Exposure of a single layer in a SLM process with green laser light to manufacture an inte ...
Quelle: © Fraunhofer ILT, Aachen, Germany.
Picture 2: “SLM in green”: the new process should allow 3D printing of pure copper components.
Quelle: © Fraunhofer ILT, Aachen, Germany.
Merkmale dieser Pressemitteilung:
Journalisten, Wirtschaftsvertreter, Wissenschaftler
Maschinenbau, Physik / Astronomie, Werkstoffwissenschaften
überregional
Buntes aus der Wissenschaft, Forschungs- / Wissenstransfer
Englisch
Picture 1: Exposure of a single layer in a SLM process with green laser light to manufacture an inte ...
Quelle: © Fraunhofer ILT, Aachen, Germany.
Picture 2: “SLM in green”: the new process should allow 3D printing of pure copper components.
Quelle: © Fraunhofer ILT, Aachen, Germany.
Sie können Suchbegriffe mit und, oder und / oder nicht verknüpfen, z. B. Philo nicht logie.
Verknüpfungen können Sie mit Klammern voneinander trennen, z. B. (Philo nicht logie) oder (Psycho und logie).
Zusammenhängende Worte werden als Wortgruppe gesucht, wenn Sie sie in Anführungsstriche setzen, z. B. „Bundesrepublik Deutschland“.
Die Erweiterte Suche können Sie auch nutzen, ohne Suchbegriffe einzugeben. Sie orientiert sich dann an den Kriterien, die Sie ausgewählt haben (z. B. nach dem Land oder dem Sachgebiet).
Haben Sie in einer Kategorie kein Kriterium ausgewählt, wird die gesamte Kategorie durchsucht (z.B. alle Sachgebiete oder alle Länder).
