idw – Informationsdienst Wissenschaft
Nachrichten, Termine, Experten
Nachrichten, Termine, Experten
In an EU project under the leadership of the Laser Zentrum Hannover e.V. (LZH), passive and active protective systems for jackets, trousers, aprons and gloves are being developed. This clothing offers effective protection against laser radiation with output densities of up to 20 Megawatts per square meter.
Protective professional clothing for firefighters, for welders or for chemists is readily available on the market. Despite the wide use of lasers in industry and research, there is currently no suitable protective clothing for the user, and when it comes to hazards from intensive laser radiation, only suitable protective laser eyewear has been classified and certified.
It is also important to have safety clothing to protect the skin, especially for the increasing number of cutting and welding applications with hand-guided laser systems. Operators are often in the directly next to the interaction zone between the laser beam and the materials to be processed, and often high-power lasers are in use. Under unfavorable conditions, for example when highly reflective surfaces are being processsed, the laser beam may be quickly deflected towards the user, causing severe skin burns. Also, near infrared laser radiation may penetrate into deeper tissue, and damage blood vessels and other biological tissue.
Therefore, the laser protective clothing developed within the framework of the EU “PROSYS” project is pursuing two strategies. First, researchers have designed a passive system with multi-layer technical textiles. The top layer has a special coating which diffusely reflects the laser radiation as much as possible. Radiation which may penetrate this first layer is then evenly spread out by the middle layer. Any residual heat, at least for a limited amount of time, which enters the energy barrier of the inner layer, may trigger a pain sensation. “This is intentional. Users should notice that they are being exposed to hazardous radiation, so they have the chance to withdraw their hand or arm,” explains Michael Hustedt, Head of the Safety Group at the LZH, and coordinator of the PROSYS project. Normal reaction time is up to 4 seconds, and the passive system can protect users for output densities up to 900 kW/m2, making this protective clothing 20 times more effective than what is presently available on the market.
The effectivity of the protective clothing can be even further improved by integrating an active system, which uses sensors embedded in the different layers. If the sensors are damaged by radiation, they send an electrical signal to the laser in less than 100 ms, and the laser is automatically shut off. The operators’ movement is not impaired, since the active system uses a wireless communication system between the safety transmitter and the receiver for the laser. Since the complete shut-down of the laser may take approximately 80 milliseconds, a combination of the active sensors and the passive protection layers makes sense. This system offers protection against output densities of up to 20 MW/m2.
The international consortium, which is composed of three research institutes, nine SMEs and one large enterprise, has developed prototypes of the protective clothing, which have been presented at different industrial fairs this year (e.g. Hannover Messe, LASER World of Photonics). Plans are being made for launching the products on the market soon.
Further developmental work will be, above all, concerned with improving the active systems, making them even more robust and flexible, without losing their protective functions. Practical tests in an industrial setting should provide further information for improving ergonomics and wearing comfort of the protective clothing, in order to achieve high user acceptance. The focus of this work is, for example, on reducing the weight of the material and improving the haptic characteristics of the gloves.
The research project PROSYS-Laser was supported by the European Union within the 7th Research Framework Programme (project number NMP2-SE-2009-229165). The partners of the LZH are the Centre Suisse d´Electronique et de Microtechnique SA and the Sächsische Textilforschungsinstitut e.V., as well as the enterprises CIM-mes Projekt sp. z o.o., Trans-Textil GmbH, TTI Technische Textilien International GmbH, JUTEC GmbH, Grado Zero Espace S.r.l., Smartex S.r.l., TDV Industries, Promat International NV, Laser on demand GmbH and Clean-Lasersysteme GmbH.
Contact:
Laser Zentrum Hannover e.V.
Michael Botts
Hollerithallee 8
D-30419 Hannover, Germany
Tel.: +49 511 2788-151
Fax: +49 511 2788-100
E-Mail: m.botts@lzh.de
http://www.lzh.de
The Laser Zentrum Hannover e.V. (LZH) carries out research and development in the field of laser technology and is supported by the Ministry of Economic Affairs, Labour and Transport of the State of Lower Saxony (Niedersächsisches Ministerium für Wirtschaft, Arbeit und Verkehr).
You can find the LZH press releases with a WORD-download and when possible illustrations at www.lzh.de under "publications/press releases"
Prototype of passive protective gloves for working with lasers with high output power
None
Criteria of this press release:
Journalists, Scientists and scholars
Materials sciences, Mechanical engineering
transregional, national
Research projects, Research results
English
Prototype of passive protective gloves for working with lasers with high output power
None
You can combine search terms with and, or and/or not, e.g. Philo not logy.
You can use brackets to separate combinations from each other, e.g. (Philo not logy) or (Psycho and logy).
Coherent groups of words will be located as complete phrases if you put them into quotation marks, e.g. “Federal Republic of Germany”.
You can also use the advanced search without entering search terms. It will then follow the criteria you have selected (e.g. country or subject area).
If you have not selected any criteria in a given category, the entire category will be searched (e.g. all subject areas or all countries).
