There is a new quality in laser material processing: With a liquid crystal modulator, the beam profile of a laser can be freely programmed with high temporal resolution, but also split into identical copies. When this quality is combined with inline process monitoring and intelligent control, zero-defect manufacturing could become reality. In the EU project METAMORPHA, the partners will develop a system with all the fine details. The module will be tested in three applications with major industrial partners. The target is to achieve energy savings of at least 30 percent compared with conventional processes.
The technology: Fast, accurate and flexible
Much has been heard of ultrashort pulse (USP) lasers: With pulses in the pico- or femtosecond range, they can ablate even the hardest materials and do so with micrometer precision. Now that USP lasers are available with several hundred watts of output power, research and development are focusing on the question of how to “put the power to the pavement.”
The Fraunhofer Institute for Laser Technology ILT in Aachen has been working on this question for years. In addition to various USP lasers, the team at Fraunhofer ILT also has the latest high-performance liquid crystal modulators for beam shaping in laser material processing. These modulators can tolerate up to 150 watts of laser power. In the EU project “METAMORPHA – Made-to-measure micromachining with laser beams tailored in amplitude and phase”, two of them are connected together in an optics module. This module can shape a beam profile individually or as a multi-beam and is compatible with various machines, for example 3-axis machines, 5-axis machines, turning machines or roll-to-roll.
With machine learning to zero-defect production
A major advantage of liquid crystal modulators is their ability to change the beam shape more than 60 times per second, which makes it possible to optimize the machining process or even change the process in a closed control loop. For this purpose, the process is continuously monitored and regulated with an intelligent control system. The process parameters and strategy are optimized using machine learning, which aims to produce parts that are completely free of defects. After a corresponding learning phase, processes can also be simulated and optimum process parameters predefined.
The main aim of the project is to save a significant amount of energy and resources in production. This is of particular interest to the three industrial partners Ceratizit, thyssenkrupp and Philips. They all have processes for which the planned laser-based manufacturing approach would mean enormous progress towards sustainable, economical production.
At thyssenkrupp, the laser is to structure embossing rolls. These are currently processed by electrical discharge machining, which consumes more than 10 GWh per year, of which the laser is expected to save 90 percent. Thanks to precise restructuring of worn surfaces with the laser, the lifespan of the embossing rollers should be increased ten-fold. Ceratizit plans to use the laser-based process to manufacture carbide punches and embossing dies and to recondition worn-out tools. A photonic process chain is to make this happen faster and more economically. And Philips wants to greatly simplify product manufacturing for the consumer sector by using a universal laser processing head.
EU project METAMORPHA
Together, the project partners want to bring together the latest laser technology, process knowledge and control know-how to replace established processes such as spark erosion or wet chemical etching and thus significantly save energy and resources. The reprocessing of tools by means of laser material processing is also an important step towards the sustainable use of resources. In the end, the laser technology used here will make a significant contribution to protecting the environment and health. The project started on September 1, 2022 and is funded by the European Union for a period of four years.
• Fraunhofer Institute for Laser Technology ILT (Coordinator)
• RWTH Aachen University - Chair of Optical Systems Technology (TOS)
• Universitat Politècnica de València (UPV)
• Vivid Components Germany
• thyssenkrupp Steel Europe
• Philips Consumer Lifestyle
Martin Osbild M. Sc.
Micro- and Nanostructuring Group
Telephone +49 241 8906-325
Dipl.-Phys. Martin Reininghaus
Head of the Micro- and Nanostructuring Group
Telephone +49 241 8906-627
Fraunhofer Institute for Laser Technology ILT
52074 Aachen, Germany
With adapted beam profiles and a multi-beam approach, the power of USP lasers can be used effectivel ...
© Fraunhofer ILT, Aachen, Germany / Volker Lannert.
In the METAMORPHA project, dynamic beam shaping for industrial applications is optimized and thus pr ...
© Fraunhofer ILT, Aachen, Germany.
Criteria of this press release:
Business and commerce, Journalists, Scientists and scholars
Electrical engineering, Energy, Environment / ecology, Mechanical engineering
Research projects, Transfer of Science or Research
You can combine search terms with and, or and/or not, e.g. Philo not logy.
You can use brackets to separate combinations from each other, e.g. (Philo not logy) or (Psycho and logy).
Coherent groups of words will be located as complete phrases if you put them into quotation marks, e.g. “Federal Republic of Germany”.
You can also use the advanced search without entering search terms. It will then follow the criteria you have selected (e.g. country or subject area).
If you have not selected any criteria in a given category, the entire category will be searched (e.g. all subject areas or all countries).