idw – Informationsdienst Wissenschaft
Nachrichten, Termine, Experten
Nachrichten, Termine, Experten
idw - Informationsdienst
Wissenschaft
EU awards €4,9 million grant for LEVIS project with 13 partners from 7 countries. LEVIS aims to develop lightweight components for electric vehicles using eco-design and circular approaches.
On February 2, 2021, the first phase of the three-year EU-funded innovation project LEVIS began with a digital kick-off event. LEVIS aims to develop lightweight components for electric vehicles using eco-design and circular approaches. The consortium - built by industrial and research partners from seven countries – envisages then to demonstrate the technical and economic feasibility of producing these components in three real-case demonstrators at a large scale.
As electrical cars are powered by heavy-weight batteries, car manufacturers and suppliers must search for new light-weighting technologies to compensate this excess weight in other car components. These technologies can directly contribute to improve vehicle efficiency in terms of kWh consumed per km and vehicle range (kms with a full battery cycle), and to reduce the environmental impact.
Weight saving without compromising on component performance
To tackle this challenge, thirteen industrial and research partners from seven countries have joined forces to develop cost-effective lightweight components for electric vehicles using eco-design and circular approaches. The technical and economic feasibility, as well as their environmental impact will be showcased through three real-case demonstrators: a suspension control arm, a battery holding set and a cross car beam.
“We will use for this multi-material solutions based on carbon fibre thermoplastic composites optimally integrated with metals, which will be produced using cost-effective and scalable manufacturing technologies” said José Ramón Valdés, Project Coordinator from ITAINNOVA (Instituto Tecnológico de Aragón). Thanks to their outstanding specific mechanical properties, these composites properly combined with metals are ideally suited for lightweight applications. In this sense, LEVIS aims to develop solutions for these multi-material components based on specific environmentally friendly resins and reinforcement systems, cost-effective manufacturing processes, optimized joints, advanced simulation methodologies and structural health monitoring technologies. The combination of these developments will allow us to obtain lightweight, cost-effective and eco-friendly components without compromising their mechanical performance, structural integrity and reliability, even improving their service life.
The next big thing in design is circular
“The lightweight components will be developed using a circular approach. This means, we will pay special attention on using recyclable materials and designing the components in a way that after the components’ end-of-life nothing will become waste and every part can be recycled or reused for the same or for other applications” stated Theodora Skordili, Business Development Manager at Cenex Nederland. Thus, only recyclable resins, bio-resourced and recycled carbon fibres will be used for building the target components. Moreover, the components’ service-life will be maximized, and all structural parts will be designed to enable a simple and effective dismantling and reuse of the components.
Introducing light-weight components into the market
The consortium’s goal is to introduce these innovative electric vehicle components into the market by the end of the project. For this, LEVIS will follow a structured exploitation strategy, covering multi-actor stakeholder consultation, intellectual property protection, business modelling and an advanced commercialization plan.
Steinbeis-Europa-Zentrum is as a project partner responsible for dissemination activities and supports the exploitation of research results.
Contact:
Steinbeis-Europa-Zentrum, Dr. Jennifer Bilbao, E-Mail: jennifer.bilbao@steinbeis-europa.de
Project Partners:
1. Instituto Tecnológico de Aragón (ITA), Spain
2. Marelli Suspension Systems Italy S.p.A (MSS), Italy
3. Mersen France Angers SAS (MERSEN), France
4. Privé Srl (PRI), Italy
5. Yeşilova Holding A.Ş. (YOVA), Turkey
6. Tofaş Türk Otomobil Fabrikasi A.Ş. (TOFAS), Turkey
7. Asociación de Investigación Metalúrgica del Noroeste (AIMEN), Spain
8. Centre Technologique Nouvelle-Aquitaine Composites & Matériaux Avancés (CANOE), France
9. Leartiker S. Coop (LEAR), Spain
10. Rise Sicomp AB (RISE), Sweden
11. Commissariat à l’Energie Atomique et aux Energies Alternatives (CEA), France
12. Stichting Cenex Nederland (CENEX NL), Netherlands
13. Steinbeis-Europa-Zentrum der Steinbeis Innovation gGmbH (SEZ), Germany
This project has received funding from the EU Horizon 2020 Research and Innovation Programme under grant agreement No. 101006888.
José Ramón Valdés,
Project Coordinator
+34 976 011 160 / +34 692041461
jrvaldes@itainnova.es
Criteria of this press release:
Journalists, Scientists and scholars
Electrical engineering, Information technology, Materials sciences, Traffic / transport
transregional, national
Research projects, Transfer of Science or Research
English
You can combine search terms with and, or and/or not, e.g. Philo not logy.
You can use brackets to separate combinations from each other, e.g. (Philo not logy) or (Psycho and logy).
Coherent groups of words will be located as complete phrases if you put them into quotation marks, e.g. “Federal Republic of Germany”.
You can also use the advanced search without entering search terms. It will then follow the criteria you have selected (e.g. country or subject area).
If you have not selected any criteria in a given category, the entire category will be searched (e.g. all subject areas or all countries).
