idw – Informationsdienst Wissenschaft
Nachrichten, Termine, Experten
Nachrichten, Termine, Experten
Siemens AG and Nexans SuperConductors GmbH (NSC) are to exhibit the first superconducting bearing for industrial applications jointly at the "SuperConductingCity," a forum on superconductivity at the Hannover Fair 2006. Siemens, which has been long involved in the field of HTS magnetic bearings, commissioned NSC to build a prototype suitable for industrial purposes for practical testing. This cooperative venture was part of a 4-MVA HTS generator project supported by BMBF. The HTS bearing is based on High-Temperature Superconductors (HTS) which support a rotating shaft in a magnetic field through contactless suspension. The shaft is held centrally as a prerequisite for optimum application in high-speed generators and motors. The bearing meets the requirements for industrial use. It is of fail-safe design, maintenance and wear-free and has a high degree of availability. HTS bearings are also inherently safe and require no additional monitoring by sensors or software, which is what distinguishes them from actively regulated magnetic bearings.
HTS bearings can open up a host of new applications or improve existing systems, for example for high-speed drives, generators or turbines. Increasingly flexible high-performance drives are required in the chemical and processing industry. Adapting the speed of high-speed compressors can play an important role in optimizing processes, and rugged, fail-safe bearings are an essential requirement for this.
An interesting area of application for HTS bearings is in flywheel power storage systems used in power supplies, in which electrical energy is temporarily stored in the form of rotational energy. When required, the rotating mass is used to drive a generator for feeding current into the power supply system again. High performances are achieved by means of large masses or high speeds. A contactless HTS bearing extends the range of usable speeds upwards and thus increases the power density. In addition, energy losses due to bearing friction can be avoided. NSC is expected to have a bearing of this kind ready before the end of the year.
The HTS bearing built by NSC can carry a radial load of up to 690 kg and is suitable for speeds of up to 3,600 rpm (appropriate for the 60-Hz current frequency). The bearing is accommodated in a welded cryogenic housing made of VA steel, which guarantees that a vacuum can be maintained over a long period. A refrigerating machine cools the superconductor directly without additional refrigerants down to the operating temperature of minus 210 °C to minus 245 °C. An integrated backup bearing ensures safety in extreme load situations. Shaft vibrations induced by resonant frequencies are attenuated by an electrodynamic damping unit.
The Nexans engineers have performed an outstanding achievement. The rotor equipped with permanent magnets runs in the bore at room temperature in a gap just 1 mm wide. There is also only 1 mm distance between the insulating cryostat wall and the HTS material at a temperature of minus 210 °C. Differential temperatures of up to 270°C are insulated over this short distance and the insulated stator is protected from the ambient heat.
The HTS bearing cooled by a small refrigerating unit will be on show during the SuperConductingCity for inspection by interested visitors, who can even try turning it by hand. A cutaway functional model showing all the components that are important for the system illustrates how the bearing works.
http://www.siemens.com/hts-bearing
HTS bearing
Source: Siemens
None
Bearing Cryostat
Source: Nexans SuperConductors
None
Merkmale dieser Pressemitteilung:
Elektrotechnik, Energie, Maschinenbau, Verkehr / Transport, Werkstoffwissenschaften
überregional
Buntes aus der Wissenschaft, Forschungs- / Wissenstransfer
Englisch
HTS bearing
Source: Siemens
None
Bearing Cryostat
Source: Nexans SuperConductors
None
Sie können Suchbegriffe mit und, oder und / oder nicht verknüpfen, z. B. Philo nicht logie.
Verknüpfungen können Sie mit Klammern voneinander trennen, z. B. (Philo nicht logie) oder (Psycho und logie).
Zusammenhängende Worte werden als Wortgruppe gesucht, wenn Sie sie in Anführungsstriche setzen, z. B. „Bundesrepublik Deutschland“.
Die Erweiterte Suche können Sie auch nutzen, ohne Suchbegriffe einzugeben. Sie orientiert sich dann an den Kriterien, die Sie ausgewählt haben (z. B. nach dem Land oder dem Sachgebiet).
Haben Sie in einer Kategorie kein Kriterium ausgewählt, wird die gesamte Kategorie durchsucht (z.B. alle Sachgebiete oder alle Länder).
