idw – Informationsdienst Wissenschaft

Nachrichten, Termine, Experten

Grafik: idw-Logo
idw-Abo
Medienpartner:
Wissenschaftsjahr


Teilen: 
04.08.2010 18:00

Precise Measurement Technology for Complex Plastic Films Enables Resource Savings

Dipl.-Phys. Axel Bauer Marketing und Kommunikation
Fraunhofer-Institut für Lasertechnik ILT

    Together with the Institute of Plastics Processing (IKV) of the RWTH Aachen University, the Fraunhofer Institute for Laser Technology ILT is presenting the prototype of a film monitoring system to measure individual layer thicknesses in multi-layered films at the International Trade Fair for Plastics and Rubber (Hall 14/ IKV Stand C16).

    All over Europe, the average demand for plastic packaging is increasing by 5.5 percent annually. As the second largest producer worldwide, Germany has profited from this increased demand, ranging at 7.5 million tons of plastic packaging a year. In addition, consumers require more and more from plastic packaging, especially for foods. End users expect fresh products to have a longer shelf life and the packaging to have increasing functionality, such as a display of the degree of freshness. These increasing requirements upon packaging films are reflected technologically in a more and more complex layer composition and an increase of functional layers of plastic films.

    As functional layers, expensive materials such as the plastic EVOH, for example, are commonly used. Thanks to its ability to act as a diffusion barrier for oxygen and water vapor, EVOH guarantees a longer shelf life of food. Due to the comparably high material price of the functional plastic, however, plastics processors have been making an effort to keep the share of the product’s raw materials as low as possible while retaining functionality. The thicknesses of the functional layers produced here lie mostly between 1 µm and 20 µm. In order to guarantee a fully functional barrier effect, manufacturers must continuously monitor integrity and thickness of the functional layer. Until now such a film inspection system has not been available, one which can measure the layer composition of multi-layered films at production speeds of up to 450 m/min.

    Cost Advantage through Precise Measurement Technology
    “While the measurement of the total thickness during the production process is already state-of-the-art, but analyzing the layer construction still occurs in the testing laboratory and not directly at the plant itself. We want to close this technology gap,” explains Janina Overbeck, leader of the working group Blown Film Extrusion at the IKV. “The contactless measurement of individual layer thicknesses during production is the most important step toward automated regulation of production plants for multi-layered plastic films.”

    Within the scope of the IRIS project, researchers from the Fraunhofer ILT together with the IKV are developing a system to measure plastic films. This measuring system is based on an interferometric sensor and uses infrared light to detect refractive index changes within a measurement sector. Such refractive index variations appear on the surface of the film as well as on the transitions between the individual film layers.

    In addition to better process control, the interferometric sensor will enable a control concept for individual film thicknesses to be implemented. By saving raw materials, companies can attain significant cost reductions. For a machine of medium capacity, this can add up to around €100,000 per year. On the International Trade Fair for Plastics and Rubber (Düsseldorf, Oct. 27 – Nov. 3, 2010), the research partners will be presenting the prototypes of their film inspection system to trade experts at Stand C16 of the IKV in Hall 14.

    Close Cooperation with End Users
    From the Fraunhofer ILT, Stefan Hölters places great emphasis on practical relevance of the joint research activities: “While the new measuring system has been in development, we have always considered, from the very beginning, the requirements of the plant builders and the film producers.” For this reason both of the institutes have cooperated closely with four small and medium-sized enterprises for this project. For this, Octagon GmbH from Würzburg and Elovis GmbH from Karlsruhe placing their long-term experience in the area of measurement technology into the development. In the coming year, the measurement system will be tested at the plant construction company Kuhne GmbH in Sankt Augustin under near-production conditions, before it is installed at the company A+C Plastic Kunststoff GmbH in Eschweiler on a production plant, where it will go into operation for several months.


    Contact Partners at the Fraunhofer ILT
    The following experts would gladly answer any questions you may have:

    Dipl.-Phys. MBA Stefan Hölters
    Measurement Technology
    Telephone +49 241 8906-436
    stefan.hoelters@ilt.fraunhofer.de

    Dr. Reinhard Noll
    Leader of the Competence Area Measurement Technology
    Telephone +49 241 8906-138
    reinhard.noll@ilt.fraunhofer.de

    Fraunhofer Institute for Laser Technology ILT
    Steinbachstraße 15
    52074 Aachen
    Tel. +49 241 8906-0
    Fax. +49 241 8906-121

    Dipl.-Ing. Janina Overbeck
    Blown Film Extrusion
    Telephone +49 241 80-28349
    overbeck@ikv.rwth-aachen.de


    Weitere Informationen:

    http://>www.ilt.fraunhofer.de<;


    Merkmale dieser Pressemitteilung:
    Maschinenbau, Physik / Astronomie, Werkstoffwissenschaften
    überregional
    Forschungsergebnisse, Wissenschaftliche Tagungen
    Englisch


    Blown film plant at a pilot plant of the IKV with a running film inspection system integrated in the contact-free thickness profile measuring sensor VanPad by Octagon Process Technology.


    Zum Download

    x

    Hilfe

    Die Suche / Erweiterte Suche im idw-Archiv
    Verknüpfungen

    Sie können Suchbegriffe mit und, oder und / oder nicht verknüpfen, z. B. Philo nicht logie.

    Klammern

    Verknüpfungen können Sie mit Klammern voneinander trennen, z. B. (Philo nicht logie) oder (Psycho und logie).

    Wortgruppen

    Zusammenhängende Worte werden als Wortgruppe gesucht, wenn Sie sie in Anführungsstriche setzen, z. B. „Bundesrepublik Deutschland“.

    Auswahlkriterien

    Die Erweiterte Suche können Sie auch nutzen, ohne Suchbegriffe einzugeben. Sie orientiert sich dann an den Kriterien, die Sie ausgewählt haben (z. B. nach dem Land oder dem Sachgebiet).

    Haben Sie in einer Kategorie kein Kriterium ausgewählt, wird die gesamte Kategorie durchsucht (z.B. alle Sachgebiete oder alle Länder).

    Cookies optimieren die Bereitstellung unserer Dienste. Durch das Weitersurfen auf idw-online.de erklären Sie sich mit der Verwendung von Cookies einverstanden. Datenschutzerklärung
    Okay