idw – Informationsdienst Wissenschaft
Nachrichten, Termine, Experten
Nachrichten, Termine, Experten
Cars, furniture, electronic enclosures – all sorts of things are painted. However, the usual paint drying processes have attracted criticism on account of high energy consumption. A new refined system reduces energy requirements, sustainably protects the environment and drastically shortens cycle times.
There are two options when it comes to curing painted components: Either you can dry them with warmth, which takes a relatively long time and requires a lot of energy, or you can irradiate them with UV light. However, there are limitations to the usual UV curing methods for industrial applications if the component has a complex shape. In this case, the light source or the part must be readjusted several times, and even then not all surfaces are optimally reached. A consortium of companies and institutes have now developed a system that makes this redundant, works quickly and saves energy. It is based on the following principle: if you beam light into the inside of a sphere, it is almost perfectly scattered by the multiple reflections off the walls. If the part is placed inside a sphere, all of its surfaces receive the same amount of UV irradiation, without the effort of adjusting the part.
Sphere made from 20 triangles
The engineers did not use a perfect sphere, instead using an approximate spherical shape made up of 20 flat triangles, which is easier to manufacture. The internal surface is made from Teflon, which reflects over 80% of the radiation and is also dirt-repellant and UV-resistant. The UV light sources weren’t the conventional mercury vapor lamps either; they were innovative high-performance LED spotlights that use very little energy, have short warm up times, can be turned off quickly and have a long useful life. Alfred Feilen, CEO at Easytec confirms: »The UV LED lamps have particularly advantageous properties for integration into the UV sphere. The small dimensions, high optical output density and quick cyclability makes them the ideal radiation source for this application.«
Furthermore, a new paint was used that was ideal for the system. However, conventional paints can be used too, even those that are cured without inert gas.
Cures in seconds
The prototype that has now been developed meets all expectations. Rainer Röck, the inventor and patent holder, is delighted: »We even placed 3D components that have several layers of paint in the patented UV sphere, turned on the high-performance UV LEDs and in the space of a few seconds of UV pulsing, the paint layer cured evenly. And that goes for components with complex shapes, indentations and holes too. The great thing about this is that neither the UV rays nor the components need to be moved or adjusted, regardless of the size and shape of the components.«
Curing times are reduced to just a few seconds, which now enables short cycle times. Energy consumption is decreased to about a twentieth of the amount used for thermal drying processes. As the paint’s solvent content is considerably lower (and in some cases is actually zero), waste air does not need to be removed by suction. Moreover, the innovative system requires significantly less production area than standard systems. On top of this, the system is scalable, so it can be manufactured to any size and can also be integrated into existing systems. The Head of Functional Coatings at Ritzi Lakiertechnik GmbH, Hartmut Jundt is pleased: »As a user, I am particularly delighted that parts from any structure can be dried quickly and effectively without programming work. Replacing parts has become a lot less daunting!«
Profile
The »UV sphere pulse system for 3D paint curing« project was supported by the Federal Ministry for Economic Affairs and Energy and spanned three years. In addition to the Fraunhofer Institute for Manufacturing Engineering and Automation IPA, Durst Lackier- und Trocknungsanlagen GmbH, Easytec GmbH, Institute of Industrial Manufacturing and Management IFF of the University of Stuttgart, Opsytec Dr. Gröbel GmbH and Ritzi Lackiertechnik GmbH were all also involved in the project.
Press communication
Jörg-Dieter Walz | Telephone +49 711 970-1667 | presse@ipa.fraunhofer.de
Specialist contact
Jörg Schieweck | Telephone +49 711 970-1874 | joerg.schieweck@ipa.fraunhofer.de
http://www.durst-lackieranlagen.de/de/
http://www.easytecgmbh.de
http://www.iff.uni-stuttgart.de/
http://www.opsytec.de/
http://www.ritzi-lackiertechnik.de/
The inside of the approximate UV sphere made from triangles with four shift sticks. The upper sectio ...
Fraunhofer IPA/Rainer Bez
None
Four painted shift sticks in the test facility.
Fraunhofer IPA/Rainer Bez
None
Merkmale dieser Pressemitteilung:
Journalisten, Wirtschaftsvertreter, Wissenschaftler
Chemie, Maschinenbau, Verkehr / Transport, Werkstoffwissenschaften
überregional
Forschungs- / Wissenstransfer, Forschungsprojekte
Englisch
The inside of the approximate UV sphere made from triangles with four shift sticks. The upper sectio ...
Fraunhofer IPA/Rainer Bez
None
Four painted shift sticks in the test facility.
Fraunhofer IPA/Rainer Bez
None
Sie können Suchbegriffe mit und, oder und / oder nicht verknüpfen, z. B. Philo nicht logie.
Verknüpfungen können Sie mit Klammern voneinander trennen, z. B. (Philo nicht logie) oder (Psycho und logie).
Zusammenhängende Worte werden als Wortgruppe gesucht, wenn Sie sie in Anführungsstriche setzen, z. B. „Bundesrepublik Deutschland“.
Die Erweiterte Suche können Sie auch nutzen, ohne Suchbegriffe einzugeben. Sie orientiert sich dann an den Kriterien, die Sie ausgewählt haben (z. B. nach dem Land oder dem Sachgebiet).
Haben Sie in einer Kategorie kein Kriterium ausgewählt, wird die gesamte Kategorie durchsucht (z.B. alle Sachgebiete oder alle Länder).
