idw – Informationsdienst Wissenschaft
Nachrichten, Termine, Experten
Nachrichten, Termine, Experten
In the food processing industry, closed production systems are cleaned according to strictly defined specifications – and often applying unnecessarily large quantities of chemicals. A fiber-optical fluorescence sensor developed at Fraunhofer IPM measures deposits in closed containers in a minimally invasive manner, thus enabling cleaning processes to be controlled and adapted to the actual degree of fouling.
In the food processing industry, high hygiene requirements apply. The cleaning of production facilities must be completely reliable in order to guarantee the safety of food products. For closed containers or pipes in which, for example, milk, beer, or juices are stored or transported, fixed cleaning routines apply. „The more, the better“ is the general rule in this case: cleaning agents, water, energy, as well as the cleaning time are very generously calculated in order to comply with the strict quality regulations. This safety margin is not only ecologically questionable but also economically unfavorable, because it causes unnecessary delays in the production process.
Minimally invasive: Millimeter-fine sensor tip detects actual contamination
The „F-Fiber“ sensor developed at Fraunhofer IPM makes it possible to adapt the cleaning of closed vessels, known as Cleaning in Place (CIP), to the actual degree of contamination. F-Fiber consists of an optical fiber measuring one millimeter in diameter, which is embedded in a stainless-steel ferrule. The fiber tip is integrated directly into the container wall of a food tank or food-conveying pipe. Alternatively, it can be attached to an existing connector using a flange. All further hardware components of the measuring system are located outside the production unit and are connected via the fiber.
At the inner wall of the tank or tube, the fiber tip is flushed by the tank or tube content. Over time, molecules accumulate on the sensor tip as well as on the surrounding tank wall, forming an unwanted deposit. The organic deposit emits fluorescence when excited with UV light via the sensor fiber. The emitted fluorescence is guided back onto a highly sensitive detector via the same fiber and evaluated. From the strength of the fluorescence signal, conclusions can be drawn about the degree of fouling. Based on these measured values, the cleaning process can be triggered and adjusted in real time – and this is possible for many different types of food soil that can even occur during the same production process.
Dr. Alexander Blättermann Phone +49 761 8857-249, alexander.blaettermann@ipm.fraunhofer.de
http://www.ipm.fraunhofer.de/en Fraunhofer Institute for Physical Measurement Techniques IPM, Freiburg/Germany
Merkmale dieser Pressemitteilung:
Journalisten, Studierende, Wirtschaftsvertreter, Wissenschaftler
Chemie, Maschinenbau, Physik / Astronomie, Umwelt / Ökologie
überregional
Forschungs- / Wissenstransfer, Forschungsprojekte
Englisch
Sie können Suchbegriffe mit und, oder und / oder nicht verknüpfen, z. B. Philo nicht logie.
Verknüpfungen können Sie mit Klammern voneinander trennen, z. B. (Philo nicht logie) oder (Psycho und logie).
Zusammenhängende Worte werden als Wortgruppe gesucht, wenn Sie sie in Anführungsstriche setzen, z. B. „Bundesrepublik Deutschland“.
Die Erweiterte Suche können Sie auch nutzen, ohne Suchbegriffe einzugeben. Sie orientiert sich dann an den Kriterien, die Sie ausgewählt haben (z. B. nach dem Land oder dem Sachgebiet).
Haben Sie in einer Kategorie kein Kriterium ausgewählt, wird die gesamte Kategorie durchsucht (z.B. alle Sachgebiete oder alle Länder).
