idw – Informationsdienst Wissenschaft
Nachrichten, Termine, Experten
Nachrichten, Termine, Experten
Prof. Michael Saliba, one of the world’s leading perovskite scientists, works with a material currently regarded as a “rising star” among semiconductors. Perovskites are highly efficient, cost-effective, lightweight, easy to produce, and a promising basis for new photovoltaic technologies. In the run-up to the Nature conference “Advancing Perovskite-Based Photovoltaics”, which will take place at the University of Stuttgart from September 29 to October 1, 2025, Saliba explains why they are so valuable, what they can achieve, and what challenges perovskite research faces.
Green solar cells for green energy that leave a relatively small CO2 footprint: To this end, Prof. Michael Saliba, Head of the Institute for Photovoltaics (ipv) at the University of Stuttgart, and his team are researching a special class of materials, perovskites. They are particularly suitable as semiconductors and therefore as a material for a new generation of solar cells. The ipv is looking to stabilize perovskites against environmental influences over the long term and identify the optimum material mixture. The researchers are also developing “tandem solar cells” that combine a perovskite layer with a silicon layer, rapidly approaching the milestone of 35% efficiency. According to Saliba, perovskites could also be used in medical technology, lighting systems, or satellites. The industry is quite interested in this “disruptively revolutionary” material.
Find out more in our interview:
Professor Saliba, you were one of the first to complete a doctorate on perovskites at Oxford in 2014 and consider them to be a disruptive innovation. What is the role of perovskites in science?
No other material has seen such a rapid rise as perovskite. Typical perovskite crystal structures were first described in 1839—in the form of mineral finds. However, researchers discovered a variant of perovskites only much later in the mid-2010s. Today we know that these crystals are particularly suitable as semiconductors and therefore as a material for the development of a new generation of solar cells, among other things. Accordingly, perovskites are boosting photovoltaics worldwide. Incidentally, it was a scientist at the University of Stuttgart—Dieter Weber—who laid the foundations for this with his research back in 1978.
What special properties do perovskites have?
Perovskites are relatively tolerant to impurities and can absorb a lot of sunlight with a low layer thickness. Above all, their production is uncomplicated, cost-effective, and energy-saving.
What is the advantage over manufacturing conventional semiconductors from silicon?
Most classic semiconductors require high temperatures for production. These can exceed 1,000°C. Clean room conditions are also often required. By contrast, perovskite crystals readily dissolve in special solvents. The perovskite ink produced in this way can then be sprayed, applied, or printed onto a surface like a paint—methods that are used in printing technology. When the solvent evaporates, an ultra-thin layer of perovskite a hundert times thinner than a human hair remains.
You combine both materials, right?
Exactly. We work with tandem solar cells. They consist of a perovskite layer and an underlying layer of silicon. Perovskites are particularly good at converting blue sunlight while silicon converts light in the red and infrared range. This allows us to make optimal use of the properties of both materials and generate considerably more energy from sunlight than with simple silicon cells. Tandem solar cells now achieve an efficiency of more than 34%, which greatly exceeds the efficiency of conventional silicon cells (around 27%).
They want to bring perovskites out of the laboratory and into industrial production. What challenges do you still have to overcome?
What is easy to produce is, of course, also easy to destroy. This means one of the biggest challenges is to stabilize perovskites in the long term. And we are working hard on this. Not just my team but thousands of research groups worldwide. Here in Stuttgart, we are primarily looking for the optimum material mixture to stabilize perovskites against environmental influences: moisture, oxygen, and, ironically, light.
Why light?
Perovskites can actually be highly sensitive to light. This is still a key issue in order to make this type of solar cell market-ready for widespread use. Too much light can cause the material to change and the solar cell to work less efficiently, especially when it is damp or hot.
What application scenarios are there beyond photovoltaics?
Perovskites can be used in detectors for medical technology (i.e., for diagnostics). Imaging processes such as positron emission tomography require special semiconductor crystals that can absorb high-energy light. Another major field of application is lighting (e.g., for displays). Next year, together with our colleagues from the Institute of Space Systems, Prof. Stefanos Fasoulas and Prof. Sabine Klinkner, we are sending our perovskite solar cells into space for the first time to verify their suitability for future satellite power applications. We believe that perovskites are particularly resistant to the harsh conditions found there.
Has industry already discovered perovskite for itself?
Industry has a great interest in these materials. Not only large companies such as Merck AG with whom we are in contact. Many start-ups are also emerging, especially in the USA. A growing market for perovskites is emerging in Asia, particularly in China. And I am convinced that we in Germany also meet all the conditions to turn perovskite technologies into a flourishing industry. A good start-up environment like the one we have in Stuttgart can certainly support this. My colleague Claudiu Mortan and I are advancing this effort with our start-up “Perosol”, a spin-off from the University of Stuttgart.
What motivates you personally?
We want to make green solar cells for green energy that leaves a relatively small CO2 footprint. The clock is ticking. Our planet continues to heat up. Being able to take our fundamental research in chemistry and physics from the laboratory scale to the rooftops and thus make a major contribution to combating climate change is motivational for me and the team and drives us forward.
About Prof. Michael Saliba:
Prof. Michael Saliba has headed the Institute for Photovoltaics (ipv) at the University of Stuttgart since 2020 and works at Forschungszentrum Jülich. Further positions in his scientific career included the Technical University of Darmstadt, the University of Fribourg, the École polytechnique fédérale de Lausanne (EPFL), and the University of Oxford. He has received, among others, the Helmholtz High Impact Award, the Rising Star Award, an ERC-Starting Grant, the Heinz Maier-Leibnitz Prize of the German Research Foundation (DFG), and the Stuart R. Wenham Young Professional Award. Saliba is one of the most cited scientists in his field worldwide.
The Nature Conference
From September 29 to October 1, 2025, the “Who’s Who” of international perovskite science will meet at the University of Stuttgart for the Nature Conference “Advancing Perovskite-Based Photovoltaics”. What progress and challenges are there in the development of highly efficient solar cells based on perovskites? How can innovative PV technologies be transferred from basic research to practical application? These and other questions will be discussed by world-leading scientists and engineers from industry.
Prof. Michael Saliba, University of Stuttgart, Institute for Photovoltaics, Tel: +49 711 685-67140, email: michael.saliba@ipv.uni-stuttgart.de
Dr.-Ing. Claudiu Mortan, University of Stuttgart, Institute for Photovoltaics, Tel: +49 711 685-67151, email: claudiu.mortan@ipv.uni-stuttgart.de
https://www.uni-stuttgart.de/en/university/news/all/expert-interview-saliba/#id-... - This interview as a video
https://www.uni-stuttgart.de/en/university/news/all/expert-interview-saliba/ - This press release on our website
https://natureconferences.streamgo.live/photovoltaics/register - program and registration for the Nature Conference
https://www.ipv.uni-stuttgart.de/en/
Michael Saliba and his team from the Institute of Photovoltaics at the University of Stuttgart are w ...
Quelle: Uli Regenscheit
Copyright: University of Stuttgart
Perovskite solar cells are highly efficient, lightweight, cost-effective, easy to manufacture, and a ...
Quelle: Claudiu Mortan
Copyright: University of Stuttgart
Merkmale dieser Pressemitteilung:
Journalisten, Wirtschaftsvertreter, Wissenschaftler
Chemie, Energie, Physik / Astronomie, Umwelt / Ökologie, Werkstoffwissenschaften
überregional
Forschungs- / Wissenstransfer, Wissenschaftliche Tagungen
Englisch
Michael Saliba and his team from the Institute of Photovoltaics at the University of Stuttgart are w ...
Quelle: Uli Regenscheit
Copyright: University of Stuttgart
Perovskite solar cells are highly efficient, lightweight, cost-effective, easy to manufacture, and a ...
Quelle: Claudiu Mortan
Copyright: University of Stuttgart
Sie können Suchbegriffe mit und, oder und / oder nicht verknüpfen, z. B. Philo nicht logie.
Verknüpfungen können Sie mit Klammern voneinander trennen, z. B. (Philo nicht logie) oder (Psycho und logie).
Zusammenhängende Worte werden als Wortgruppe gesucht, wenn Sie sie in Anführungsstriche setzen, z. B. „Bundesrepublik Deutschland“.
Die Erweiterte Suche können Sie auch nutzen, ohne Suchbegriffe einzugeben. Sie orientiert sich dann an den Kriterien, die Sie ausgewählt haben (z. B. nach dem Land oder dem Sachgebiet).
Haben Sie in einer Kategorie kein Kriterium ausgewählt, wird die gesamte Kategorie durchsucht (z.B. alle Sachgebiete oder alle Länder).
